|
|
USED CONVEYOR OVENSE. McGrath Inc, 35 Osborne St., Salem MA
01970
|
OVC010
|
Vitronics 1112, 10" belt, 12" hot zone, 425°C 1" clearance, top & bottom heat, 1 zone each Nitrogen inlet, 208/240/1
Approx 5' long overall PIX2 |
$2,450
|
|
OVC015
|
Vitronics 1336 6" belt, 36" hot zone. 1" clearance. 3 zones each top and bottom. 7' overall
|
$4,250
|
|
OVC017 |
Vitronics-Soltec Multi-Pro 305 SMD solder reflow 250°C. 7" belt, 2" vertical
clearance, 32" heated length., nitrogen purge. s/n 12012. 220/60/1, 25
amps.300#, 4 zone controls. IR & convection PIX2 |
$7,250 |
|
OVC025
|
C.W. Price 12-2122, 12" belt, 96" hot zone, 200°C two zone, 2"clearance, 240/480, now wired for 480,20-80 IPM, 4 KW
. Load zone: 24". Unload zone: 24". Overall length 13'. This modified
version was
originally a longer 3 section unit that has been cut down to a 2 section unit. |
$4,150
|
|
OVC050
|
C. W. Price 12" belt, 48" hot zone, 200°C, 1 zone, 2" clearance. 240/480, now
wired for 480. 2 KW.Approx 8 feet
long overall. This is a modified version of a 12-2122, where it has been
cut down to a single 48" hot zone.
|
$2,950
|
|
OVC055
|
Lindberg 840 conveyor furnace, 600°C, 9" wide, 4" vertical clearance. 40" hot zone. Missing drive capstan and motor. Three zones , Nitrogen purge 8.5 KW, 230/60/3
|
$4,500
|
|
OVC060
|
American Ultraviolet LC-06-1-T3 ,6" belt, 125/200/300 watts per inch aka Loctite. 120 v, 20a
|
$ 2,350
|
|
OVC062
|
GCA 4101A 6" belt, Nitrogen purge, photo resist bake, 200°C, 18" hot zone. 115 volts
|
$1,950
|
|
OVC064 |
Novastar Technologies, Inc
1800A reflow solder oven.18" width 51" heated tunnel length, 4 zones.
220/50/60/3, 40 amps. RS232C. PIX2
PIX3
PIX4 PIX5 Maximum rated temperature:
260 °C |
$9,250 |
|
|
978-744-3546
11/19/07 |
|
|
|
