|
|
USED METALLURGICAL EQUIPMENT
|
|
E. McGrath Inc, 35 Osborne St, Salem MA
01970 Click on underlined item numbers on the left for pictures.
 |
|
|
LBQ001 |
Buehler MPC 2000 low speed grinder polisher for Chips & IC's, model 49-3100. 1
to 50 rpm, with oscillating motor, digital micrometer, microscope. Requires
60-5300 MicroPrecise TriPpoint. PIX2
PIX3
PIX4
More_Info
Video |
$6,250 |
|
LBQ002 |
Buehler Handimet2 roll grinder PIX2
More-Info |
$1,175 |
|
LBQ002B |
Buehler HandimetI strip grinder. 39-1471
More_info |
$795 |
|
LBQ002C |
Buehler HandimetII roll grinder 39-1472
PIX2
PIX3
More_Info |
$975 |
|
LBQ004 |
Buehler Ecomet 250 49-7200 10" variable speed grinder, now with 8" platen.10 to
500 rpm 100 to 240 universal voltage. 100#
PIX2
PIX3 Newly
Arrived |
$4,250 |
|
LBQ005 |
Buehler 60-2400 specimen loading fixture with 6 position spring disk
More_Info |
$650 |
|
LBQ007 |
Buehler Fiberskope, 0801-0211, 10 & 20 power objectives, 10 X eyepiece. |
$675 |
|
LBQ008 |
Buehler Fibrpol 69-3500-160 optical fiber polisher with 12" variable speed
platen. PIX2
PIX3
PIX4 |
$5,950 |
|
LBQ009 |
Buehler Fibrpol PC 69-2500 optical fiber polisher. |
$925 |
|
LBQ010 |
Buehler Fibrskope, 0801-9505 optical fiber microscope. Comes with your choice of
a 10 or 20 power eyepiece. Add $95 if you wish the 10-20 X zoom lens,
0185-0204 instead. More Info |
$575 |
|
LBQ011 |
Buehler Fibrmet 69-3000-160 optical fiber polisher, 115 volts
PIX2
PIX3. |
$2,100 |
|
LBQ011A |
Buehler Fibrmet cover for above when purchased at the same time |
$85 |
|
LBQ016 |
Buehler Fibrpol 3000 8" variable speed polisher 50-200 rpm with timer and
oscillating post to accept a fiber optical polishing head (not included)
model 69-7000 Can be used similar to the Ecomet3 for manual polishing but lower
speed and HP. Note, water controlled by manual valve in the top rear.
PIX2
PIX3
PIX4 85-264 volts |
$2,150 |
|
|
|
|
|
|
BELT GRINDERS |
|
|
LBQ019 |
Buehler Duomet II dual belt grinder, (yellow) 16-1290-160 ,sink. 115 volts.
More_Info |
$4,125 |
|
LBQ019C |
Buehler Duomet II dual belt grinder, (white) 16-1290-160 ,sink. 115 volts. |
$5,950 |
|
LBQ021 |
Buehler Surfmet II single belt grinder 16-1280-160 115 v 90#
More-Info |
$1,750 |
|
LBQ022 |
Buehler Surfmet I single belt grinder & sink 16-1270-160 115 volts.
More-Info |
$2,750 |
|
|
|
|
|
|
HOT PRESSES |
|
|
LBQ025 |
Buehler Simplimet II specimen mounting press 20-1320-115, with a choice of 1",
1.25" or 1.5" mold, 115
volt heater 85# More_Info |
$2,750 |
|
LBQ025D |
Buehler 20-2222-115 automatic heater for earlier hot mounting presses. 1-3/4" ID
115 volts PIX2 |
$295 |
|
LBQ026 |
Buehler specimen mounting press with 1-3/4" heater and a choice of either a 1" or 1.25" mold 115 volts.
69#
More_Info |
$1,950 |
|
LBQ028 |
Buehler Pneumet I 20-1390-115 molding press, air operated. With your choice of a
1, 1.25 or 1.5" mold assembly. 115 volts 96# |
$2,950 |
|
|
|
|
|
LBQ029 |
Buehler Ecomet 3 49-1750-160 8 inch variable speed polisher, 50 to 500 rpm. 115
volts. More_Info |
$3,350 |
|
LBQ029B |
Buehler Ecomet 3000, 8" variable speed polisher mounted in 30" wide bench with
sink. 115 volts PIX2 |
$3,750 |
|
LBQ029C |
Buehler Ecomet 3000 8" variable speed polisher 49-3000-160P to mount on a
table top, 16 x 20-3/4" rough opening. 115 volts.
PIX2 |
$3,350 |
|
LBQ030A |
Buehler Ecomet 4000 12" variable speed polisher 49-1780 with
Automet2 head. Choice of either a 10
position 1" or 3 position 2", specimen mount holder. 50 to 500 rpm 115 volts.
PIX2 PIX3
PIX4 More_Info
Note: membrane on button does not work. We will install a separate push button |
$7,150 |
|
LBQ031 |
Buehler Ecomet 3000 49-1760-160 8 inch polisher with
Automet3000 power head. 50 to 500
rpm. 1.25" specimen holder. Magnetic platen. 85 to 265 volts, 50/60
universal input. Note, power comes on with the rear breaker and stays on. The
front panel on/off buttons have no effect Newly Arrived
PIX2
PIX3
PIX4
PIX5 |
$7,250 |
|
LBQ031J |
Buehler Ecomet 3 49-1750-160 8 inch polisher with Automet2 power head. Lift Lock
chuck 50 to 500 rpm. 1.25" specimen holder, holds 6. 115 volts.
PIX2
PIX3 |
$6,950 |
|
LBQ031K |
Buehler 60-2499 602499 lift lock chuck adapter |
$475 |
|
LBQ032 |
Buehler Ecomet III variable speed polisher. With 8" wheel. 50 to 500 rpm 115
volts More_Info |
$2,450 |
|
LBQ032B |
Buehler Ecomet II with Whirlimet, 60-1528, holds 3 specimens, choice of 1, 1.25
or 1.5 inch. PIX2 |
$3,150 |
|
LBQ034 |
Buehler Ecomet 4000, 12" variable speed polisher 49-1780 CE rated. 115 volts.
More_Info |
$3,950 |
|
|
|
|
|
|
SAWS |
|
|
LBQ035 |
Buehler IsoMet reconditioned low speed saw, 300 rpm 11-1180-160 complete with
standard arm, weight set, choice of chuck below and 4" blade. 115 volts. Now
shown with 11-1187 More_Info
PIX2 |
$2,275 |
|
LBQ035chk |
Choice of Buehler chucks with saw |
|
|
LBQ035B |
Buehler IsoMet l 11-1181 swivel arm assembly installed on LBQ035 in
lieu of standard arm |
$200 |
|
LBQ035D |
Buehler
IsoMet
low speed saw, white, 11-1280-160 complete with weight set, 4 chucks 5"
blade and blade truing attachement.120 volts PIX2
PIX3
PIX4
PIX5
Add 125 usd for conversion to 220 volts. As New Condition. Newly Arrived |
$3,950 |
|
LBQ035E |
Buehler Isomet dressing chuck 11-1196, for newer white saw (sloped front) |
$275 |
|
LBQ035F |
Buehler Isomet dressing chuck 11-1196 for older yellow saw |
$275 |
|
LBQ036 |
Buehler IsoMet 5000 automatic precision saw 11-2780, 7" blade capacity 200-5000
rpm, Motorized micrometer 1.25 HP motor. 83-264 VAC 50/60 |
$9,250 |
|
LBQ037 |
reconditioned Buehler IsoMet 4000 automatic precision saw 11-2680, 7" blade
capacity. 200-5000 rpm, 1.25 HP motor. With blade truing assembly 83-264
VAC 50/60 Hz PIX2
PIX3
PIX4
PIX5 |
$7,950 |
|
LBQ037A |
Buehler 11-2703 6" stainless steel vise for Isomet 4000/5000 saw |
$575 |
|
LBQ038 |
Buehler Isomet 1000 precision saw With 5" diamond blade & V saddle chuck.
115 to 230 universal voltage. CE rated
More_Info PIX2
PIX3
PIX4 |
$5,450 |
|
LBQ038A |
Buehler table saw attachment for Isomet 1000 |
$925 |
|
LBQ038B |
Buehler 11-2181 rotating chuck accessory for use in the Isomet 1000 saw.
New Surplus, open box
PIX2 Newly
Arrived |
$1,475 |
|
LBQ039 |
Buehler Met-Klamp II right hand vise, 10-3295 for Samplmet abrasive saw. Mounts
on 1/2" shaft. We have a
left hand one as well, 10-3290 |
$625 |
|
LBQ040B |
Buehler Abrasimet2 10" abrasive saw. 95-C1800-260 . left & right hand
vises, 4 HP 230/60/3 Without pump File Photo |
$5,550 |
|
LBQ040D |
Buehler Delta AbrasiMet 10-2145-260 10" blade, 4 HP Abrasive cutter. 12 mm T slot
tables, L/H vise. With coolant tank/pump. 230/60/3
PIX2
PIX3
PIX4
PIX5
PIX6
PIX7 Newly Arrived |
$6,950 |
|
LBQ040E |
Buehler AbrasiMatic 300. 12" abrasive wheel. Left & right hand vises. With
coolant tank & pump. 230/60/3
PIX2 PIX3
PIX4
PIX5
PIX6
PIX7
PIX8 Newly Arrived |
$11,750 |
|
|
|
|
|
LBQ041 |
Buehler Petrothin 38-1450-160. 120 volts.
More_Info File photo.
Reconditioning in progress |
$6,500 |
|
LBQ044 |
Buehler VibrometI polisher. With three
1.25" holder/weights. Plastic cover cracked. 115 volts, approx 175#
PIX2
PIX3 |
$2,950 |
|
LBQ044A |
Buehler VibrometI polisher. Includes retaining ring. |
$3,200 |
|
LBQ046 |
Buehler Minimet 1000 cross section polisher, 69-1000 120/240 universal voltage,
with instruction manual
PIX2
More_Info |
$1,925 |
|
LBQ050 |
Buehler Ecomet6 2 platen, 8" variable speed polisher, 49-1885-160 with Automet2
head 60-1950-160 . 50 to 50 0 rpm. with 1.5" three specimen holder. 115 v
PIX2 |
$7,450 |
|
LBQ051 |
Buehler Ecomet6, 2 platen 8" variable speed polisher. 115 volts |
$3,950 |
|
LBQ055 |
Leitz Miniload micro hardness tester, Vickers diamond, 100 and 400 power
microscope, 25, 1000 & 2000 gram weights. Inch graduations on X-Y stage. 120 or
240 volt input
More Info
PIX2
PIX3
PIX4
PIX5
PIX6
PIX7
PIX8 |
$5,250 |
|
LBQ057 |
Leitz Miniload II micro hardness tester 721-425. With diamond, 100/500 x
microscope. Weight sets: 10, 15, 25, 50, 100, 200, 300, 500, 1000 & 2000 ponds.
Newly arrived.
PIX2
PIX3
PIX4 |
$6,950 |
|
LBQ066 |
Buehler 40-4048 8" plain bronze wheel (aluminum wheel $225) |
$275 |
|
LBQ068 |
Buehler 40-4061 8" aluminum platen, New Surplus. PIX2 |
$315 |
|
LBQ069 |
Buehler Metlap 1 |
$750 |
|
LBQ070 |
Buehler Metlap 2000 |
$975 |
|
LBQ075 |
Leco VC-50 low speed saw, 5" capacity, 0 to 500 rpm, with integral vise, 1.5"
and sliding weight. 115 volts 49# PIX2
PIX3
More_Info |
$3,150 |
|
LBQ080 |
Buehler Datamet,60-501-160 microprocessor version of Ecomet IV as shown below.
115 volts.
PIX2
PIX3 |
$5,500 |
|
LBQ081 |
Buehler Ecomet IV 12", 50 to 500 rpm polisher with EurometI automatic pneumatic
head Your choice of a 10 position 1 or six position1.25" specimen holder. More_Info
PIX2
PIX3
PIX4
PIX5
PIX6
PIX7
Video |
$5,500 |
|
LBQ082 |
Buehler Ecomet IV 12", 50 to 500 rpm polisher. 115V 110#
More_Info |
$3,250 |
|
LBQ084
|
Buehler Automet attachment, 60-1900 : Choice of 1", 1.25" or 1.5" holders and pressure plates.
115 volts. Fits yellow Ecomet I, II, III polishers
PIX2
More_Info |
$1,325 |
|
LBQ084A |
Buehler Automet 1" holder and pressure plate 60-2041 60-2011 |
$395 |
|
LBQ084B |
Buehler Automet 1.25" holder and pressure plate 60-2142, 60-2112 |
$395 |
|
LBQ084C |
Buehler Automet 1.5" holder and pressure plate 60-2241, 60-2213 |
$395 |
|
LBQ085 |
Buehler Whirlimet, 60-1528, holds 3 specimens, choice of 1, or 1.25 inch.
Fits yellow Ecomet I, II, III series polishers 115 volts
PIX2 |
$1,325 |
|
|
STRUERS |
|
|
LBQ095 |
Struers DAP7, two speed polisher, 125/250 rpm. With 3 8" platens.
230/60/50/1 Add $100 for a step up transformer. PIX2 |
$2,150 |
|
LBQ096 |
Struers PrimoPress 1.25" mold. 115 volts. Only one side is
used. 147# |
$2,450 |
|
LBQ102 |
Struers vise for Discotom-2 368MP058. Works fine
PIX2
PIX3 |
$745 |
|
LBQ111 |
Struers Discotom-5 10" cutter with automatic feed.10 mm T slot table, L/H
vise 5 HP 230/60/3,
PIX1
PIX2
PIX3 |
$9,250 |
|
LBQ112 |
Struers Discotom-6 10" cutter with automatic feed. 10 mm T slot table. L &
R vises 5 HP 460/60/3,
PIX2
PIX3
PIX4
PIX5
PIX6
PIX7
Video |
$10,750 |
|
LBQ115 |
Struers DP-U3 300mm/12" variable speed polisher 0 to 1100 rpm with PdM-Force
automatic specimen mover with weights and 1.5" capacity (FORMA). 115 volts
PIX2
PIX3 Newly
Arrived |
$3,450 |
|
|
|
|
|
|
978-744-3546
4/3/24 |
|
|
|
emcgrathco@gmail.com |
|
|
|
www.emcgrath.com |
|
|
|
